Print
    NEW AGROTK ATK-WB24A AUTOMOTIVE WHEEL BALANCER – 1 Used Tires upcoming auctionsNEW AGROTK ATK-WB24A AUTOMOTIVE WHEEL BALANCER – 1 Used Tires upcoming auctions
    Photos(1)

    NEW AGROTK ATK-WB24A AUTOMOTIVE WHEEL BALANCER – 1

    Current Bid:
    USD $0.00
    Auction Date: Sat, November 21, 2026 (CST)
     
     

    Bidding

    Place max bid USD ($):

    *You must be logged in or register to bid on this auction.

    I Already Have an Account - Log In
    Access your account instantly and continue bidding on this item.
    I Need to Register to Bid
    Takes just a few minutes. We'll walk you through the approval process.

    Keystone Auction Company LLC

    Contact:Kevin Neal

    New Bethlehem, Pennsylvania 16242

    General

    Manufacturer
    NEW AGROTK ATK-WB24A AUTOMOTIVE WHEEL BALANCER – 1
    Condition
    Used
    Stock Number
    663
    Description
    Manufacturer: AGROTK Model: ATK-WB24A Serial Number: Not Provided Condition: NEW – UNUSED Operating Condition: NOT OPERATIONALLY TESTED Equipment Type: Automotive Wheel & Tire Balancing Machine Power Source: 110V Electric – Single Phase Rim Diameter Capacity: 10"–24" Rim Width Capacity: 1.5"–16" Maximum Wheel Diameter: 39 Inches Maximum Wheel Weight: 154 lbs Lot Location: 1216 Olean Trail, New Bethlehem, PA 16242 AUTOMOTIVE WHEEL BALANCER SPECIFICATIONS Specification Details Manufacturer AGROTK Model ATK-WB24A Equipment Type Automotive Wheel Balancer Condition New – Unused Power Source Electric Rated Voltage 110V AC Frequency 60 Hz Electrical Phase Single Phase Motor Power 0.34 HP Approximate Motor Output 250 Watts Balancing Speed 200 RPM Rim Diameter Range 10"–24" Rim Width Range 1.5"–16" Maximum Wheel Diameter 39 Inches Maximum Wheel Weight 154 lbs Published Balancing Accuracy ±1 Gram / Approximately ±0.035 oz Published Operating Noise Less Than 70 dB Published Machine Weight Approximately 290 lbs Balancing System Electronic Wheel Balancing Wheel Mounting Center Shaft with Compatible Cones & Hardware Display System Electronic Digital Display Distance Measurement Distance Gauge – Published Configuration Automatic Start Hood-Activated Start – Published Configuration Protective Hood Model Configuration Dependent Balancing Weight Placement Determined by Electronic Balancing System Wheel Compatibility Compatible Automotive Wheels Within Rated Dimensions Primary Applications Automotive Tire Shops, Garages & Wheel Service Facilities Specification Note: Published AGROTK ATK-WB24A specifications identify 110V/60Hz single-phase operation, 0.34 HP motor, 200 RPM balancing speed, 10"–24" rim diameter capacity, 1.5"–16" rim width capacity, 39" maximum wheel diameter, 154 lb maximum wheel weight, and approximately 290 lb machine weight. Actual specifications and included accessories should be verified on the machine. AUTOMOTIVE WHEEL BALANCER FEATURES New, unused AGROTK automotive wheel balancing machine. Model ATK-WB24A. Designed for balancing compatible automotive wheel and tire assemblies. Standard 110V electric operation. Single-phase, 60 Hz electrical system. 0.34 HP electric motor. Electronic wheel balancing system. Published 200 RPM balancing speed. Accommodates compatible rims from 10 to 24 inches in diameter. Accommodates rim widths from 1.5 to 16 inches. Maximum wheel diameter of 39 inches. Maximum wheel weight of 154 pounds. Published balancing accuracy of approximately ±1 gram. Electronic digital display for balancing measurements. Distance gauge identified in published configurations. Hood-activated automatic start identified in published configurations. High-precision balancing shaft identified in published configurations. Designed for professional and personal automotive service applications. Suitable for tire shops, garages, dealerships, and maintenance facilities. Compatible with appropriately sized automotive wheels and tires. COMMON APPLICATIONS When properly assembled, calibrated, and operated, this wheel balancer may be suitable for: Passenger vehicle wheel balancing. Automotive tire service. Light truck wheel balancing within rated capacity. SUV wheel balancing within rated capacity. Automotive repair shop operations. Tire installation and replacement services. Wheel and tire maintenance. Automotive dealership service departments. Independent tire shops. Vehicle maintenance facilities. Fleet vehicle maintenance. Automotive restoration shops. Home automotive workshops. Used vehicle dealership maintenance. Equipment service facilities. Diagnosing wheel imbalance. Reducing vibration caused by improperly balanced wheel assemblies. Application Note: Wheel compatibility depends on rim diameter, rim width, total wheel diameter, wheel weight, center bore, mounting accessories, and machine clearance. Not all wheels within the published diameter range are necessarily compatible with the included mounting hardware. EQUIPMENT CONDITION Overall Condition: NEW – UNUSED Operating Condition: NOT OPERATIONALLY TESTED Electric Motor: Not Operationally Tested Balancing System: Not Operationally Tested Digital Display: Not Operationally Tested Control Panel: Not Operationally Tested Balancing Shaft: Not Operationally Tested Distance Gauge: Not Operationally Tested Automatic Start Function: Not Operationally Tested Protective Hood: Configuration & Operation Not Independently Verified Calibration: Not Independently Verified Balancing Accuracy: Not Independently Verified Electrical System: Not Operationally Tested Power Cord: Condition Not Independently Verified Wheel Mounting Cones: Inclusion Not Confirmed Quick-Release Nut: Inclusion Not Confirmed Wheel Weight Tools: Inclusion Not Confirmed Assembly Hardware: Completeness Not Independently Verified Service Requirements: Assembly, Inspection, Calibration & Possible Adjustments May Be Required Before Operation ADDITIONAL INFORMATION New, unused AGROTK ATK-WB24A automotive wheel balancer. Designed for professional automotive wheel and tire balancing applications. Standard 110V electric operation. Single-phase, 60 Hz electrical requirements. 0.34 HP electric motor. Published balancing speed of 200 RPM. Designed to accommodate rim diameters from 10 to 24 inches. Designed to accommodate rim widths from 1.5 to 16 inches. Maximum wheel diameter of 39 inches. Maximum wheel weight of 154 pounds. Published balancing accuracy of approximately ±1 gram. Published operating noise level below 70 dB. Approximately 290-pound published machine weight. Electronic wheel balancing system. Digital display and electronic controls. Distance measurement gauge identified in published configurations. Automatic start feature identified in published configurations. Designed for automotive repair shops, tire service centers, and personal garages. Suitable for balancing compatible passenger vehicle, SUV, and light truck wheels. Machine has not been connected to electrical power or operationally tested. Balancing calibration and accuracy have not been independently verified. Mounting cones, adapters, quick-release hardware, and other accessories must be verified for inclusion. Some assembly, installation, calibration, or adjustments may be required before operation. Buyer is responsible for verifying actual specifications, electrical requirements, included components, and overall condition. Buyer is responsible for providing appropriate transportation and loading arrangements. IMPORTANT AUCTION NOTICE NEW – UNUSED – NOT OPERATIONALLY TESTED This AGROTK ATK-WB24A automotive wheel balancer is being offered in new, unused condition. The machine has not been connected to electrical power or tested under operating conditions. Motor operation, electronic controls, balancing accuracy, automatic start functions, distance measurement, calibration, and overall performance have not been independently verified. IMPORTANT SPECIFICATION NOTICE: Published specifications identify a 10"–24" rim diameter range, 1.5"–16" rim width range, 39" maximum wheel diameter, 154 lb maximum wheel weight, 200 RPM balancing speed, and 110V single-phase electric operation. Buyers should verify the specifications and identification plate on the actual machine before bidding. IMPORTANT ELECTRICAL NOTICE: This machine is advertised for 110V AC, 60 Hz, single-phase operation. Buyers must verify electrical requirements and ensure the machine is connected to a properly grounded electrical supply in accordance with manufacturer instructions. IMPORTANT WHEEL CAPACITY NOTICE: The published maximum wheel weight is 154 pounds. Buyers must not exceed the manufacturer's approved weight or dimensional limits. Wheel compatibility is dependent on the complete wheel assembly, mounting hardware, center bore, and available machine clearance. IMPORTANT CALIBRATION NOTICE: The wheel balancer has not been independently calibrated or tested for measurement accuracy. Calibration, adjustments, or setup procedures may be necessary before the machine is placed into service. IMPORTANT ACCESSORY NOTICE: Wheel mounting cones, adapters, quick-release nuts, calibration weights, wheel weight tools, and other accessories are not guaranteed to be included unless specifically shown in the actual lot photographs or identified in the description. Buyers should verify all included components before bidding. IMPORTANT ASSEMBLY NOTICE: The machine may require assembly, adjustment, installation of the protective hood, installation of mounting hardware, or other setup procedures before operation. Buyers are responsible for completing all required assembly and setup according to manufacturer instructions. IMPORTANT AUTOMATIC START NOTICE: Published configurations identify a hood-activated automatic start function. The actual machine configuration and operation of this feature have not been independently verified. IMPORTANT SAFETY NOTICE: Wheel balancing machines contain rotating components and can cause serious injury if improperly operated. All wheels must be properly centered and secured to the balancing shaft before operation. Operators must follow manufacturer instructions, use all required guards, and keep hands, tools, and loose clothing clear of rotating assemblies. IMPORTANT INSTALLATION NOTICE: The machine must be installed on a suitable, level surface and secured as required by the manufacturer. Buyers are responsible for ensuring adequate operating clearance, proper electrical connections, and safe installation. IMPORTANT SERVICE NOTICE: Before operation, the buyer should inspect the electric motor, balancing shaft, wheel mounting hardware, protective hood, control panel, display, electrical connections, and all associated components. Any necessary repairs, calibration, adjustments, or servicing are the responsibility of the buyer. IMPORTANT LOADING NOTICE: Published specifications identify an approximate machine weight of 290 pounds. Buyers are responsible for arranging suitable personnel, equipment, and transportation for safe loading and removal. Buyers are encouraged to inspect the wheel balancer prior to bidding to verify condition, completeness, specifications, included accessories, and suitability for intended use. Item sells AS IS, WHERE IS, in accordance with the auction's published terms and conditions.